Oxygen
The gas of life — and of heavy industry
- Purity
- 99.6%
- Pressure
- 100–150 bar
- Compressed gas
- Cryogenic liquid
- Healthcare: hospitals, intensive care, home therapy
- Steel making and metal cutting
- Glass melting
Nabik Oxygen Factory
Our resources cover Syria
A leading producer of industrial and medical gases — oxygen, nitrogen and argon — with more than 40 years of experience in air separation and liquefaction.
- O₂
- N₂
- Ar
- 40+ years
- Peak purity
- 99.9995%
- Fill pressure
- 200 bar
- Production & distribution sites
- 05
- Governorates served
- 14
Who we serve
Industries we serve
Select a sector to jump to the gas it relies on.
What we produce
Our products
Three core gases, produced in both gaseous and liquid form, with documented purity and certified specifications.
Nitrogen
Protection, cooling and preservation
- Purity
- 99.999%
- Pressure
- 100–150 bar
- Compressed gas
- Cryogenic liquid
- Food preservation and packaging
- Oil and gas: purging and pressure testing
- Leather tanning
Argon
Our highest purity, for precision welding
- Purity
- 99.9995%
- Pressure
- 200 bar
- Compressed gas
- Cryogenic liquid
- TIG and MIG welding of aluminium and stainless steel
- Shielding gas in light-bulb manufacturing
- Fire suppression systems
How we supply
Supply modes
Three ways to receive the gas, differing by how much you use and how you work. Pick the one that fits, or ask us to advise.
Compressed gas cylinders
Gas compressed into steel cylinders, delivered full and exchanged for empties. The most flexible option when consumption is intermittent or spread across several sites.
Best for
Low to medium consumption — workshops, hospitals, laboratories and mobile work sites
Gases available this way
- O₂ Oxygen
- N₂ Nitrogen
- Ar Argon
Cryogenic liquid — dewars
Insulated vessels holding the gas as a liquid at very low temperature. A dewar carries far more gas than a cylinder of the same size, and can be drawn off as either liquid or gas.
Best for
Higher volumes without installing a fixed tank, and any process that uses the gas in liquid form
Gases available this way
- O₂ Oxygen
- N₂ Nitrogen
- Ar Argon
Bulk road tankers
Liquefied gas delivered by refrigerated tanker straight to the customer's site. The most economical route for large, continuous consumption, and it cuts the number of deliveries.
Best for
Large, continuous consumption — steel and glass plants, chemical industries and water treatment
Gases available this way
- O₂ Oxygen
- N₂ Nitrogen
Oxygen · Filling pressures
100–150 bar
Nitrogen · Filling pressures
100–150 bar
Argon · Filling pressures
200 bar
Cylinder sizes vary by gas — contact us for what is currently available.
Ask us which mode fitsFor the health sector
Medical gases
We supply oxygen to hospitals, intensive care units and home therapy, under licence from the Ministry of Health.
Healthcare applications
Hospitals
Regular supply to hospital departments
Intensive care
Where an interruption in supply is not tolerable
Home therapy
Cylinder sizes suited to use at home
For hospitals and health authorities: contact us to discuss supply detail, consumption volume and delivery arrangements.
Hospital enquiry on WhatsAppCommercial division
Gases and equipment we trade
Alongside our own production, we supply additional gases and the full range of operating equipment.
Other gases
- Compressed air
- Gas mixtures
- Carbon dioxide (CO₂)
- Nitrous oxide
- Acetylene
- Helium
- Neon
Gas accessories
- Gas cylinders
- Pressure gauges
- Pressure regulators
- Valves
- Medical flow meters
Quality & accreditation
Licences and certifications
An internationally accredited quality management system, alongside the Syrian licences for industrial and medical production.
- ISO 9001:2015
Quality Management System
OSS Middle East Certification
Certified scopeProduction and distribution of liquid and gas (nitrogen, oxygen and argon)
- Certificate no.
- MSE 0600725A
- Accreditation
- RGAC / IAF · CAB #011785
Industrial Registry No. 1
Syrian Arab Republic
Medical Licence No. 1338
Syrian Ministry of Health
Who we are
About us
Syrian Natural Resources Company (LLC) is the leading company in Syria in investment and industry. It offers a range of innovative solutions built on continually improved technology for producing air gases — oxygen, nitrogen and argon — along with many other gases.
The company draws on more than 40 years of producing and marketing gases through Nabik Oxygen Factory, which places it among the first in Syria in this field. The project grew out of the global development of the gas industry and the shift towards liquefaction, together with rising Syrian demand for medical and industrial gases. Our ambition is to lead our industry through performance and responsibility.
- 0 +
- years of experience
- 0
- branches
- 0
- governorates served
Plant location
Hasya Industrial City — Chemical Industries Zone, Homs.
purity up to
99.9995%
What drives us
Vision, mission and values
What we work towards, and how we work.
-
Our vision
To be a leading investment company built on the most advanced management and scientific systems, earning the trust of investors and spreading a culture of successful teamwork. Our work begins with the air separation plant, and we intend to become an incubator for many investment projects in the years ahead — contributing to the rebuilding of Syria.
-
Our mission
To build an integrated team with clearly divided duties and responsibilities, able to carry any project through: the economic study, the capital required, the company's organisational structure, the production and marketing plans, and the technical and administrative expertise needed to realise our vision.
-
Our commitments
Our ethical obligations matter as much as our financial ones — towards our employees, the environment and the communities we work in. They are set out in the strict procedures the company applies to safety, health, environment and quality: the same procedures that make the business run well. We have also set high standards of performance across every area.
-
Our policy
We work to deliver the best products and services, at a quality that meets our customers' expectations, while safeguarding the safety and credibility of our investments and protecting the environment we operate in. We comply with the laws and standards governing quality and the HSE system, and apply practical measures to conserve resources, prevent pollution, reduce waste and limit production risk.
-
Innovation
Because we are always looking towards a better future, we pay particular attention to supporting technical studies and research, and to drawing on practical and scientific expertise to produce innovative ideas in development and modernisation.
Our focus
Four priorities that guide our work
-
Health
Licensed medical oxygen supplying hospitals, intensive care units and home therapy.
-
Energy
Gases that serve the oil and gas sector, and continuous improvement of energy efficiency at our plant.
-
Economy
Local production that reduces reliance on imports and supports Syrian industry.
-
Environment
Our raw material is air itself, and our process releases no polluting by-products.
Safe handling
Safety and gas handling
Compressed gases and cryogenic liquids are safe when handled correctly. These are the essential general precautions for anyone storing, transporting or using our gases.
Storage
- Keep cylinders upright at all times, chained or restrained so they cannot fall.
- Store in a well-ventilated place, away from heat, ignition sources and direct sunlight.
- Separate oxygen cylinders from flammable gases such as acetylene — by distance, or by a non-combustible barrier.
- Keep the valve protection cap fitted on every cylinder that is not in use.
- Keep full and empty cylinders apart, and mark each group clearly.
Handling and use
- Never use oil or grease on oxygen fittings or regulators — they can ignite spontaneously in compressed oxygen.
- Use a regulator rated for that specific gas and pressure; never substitute one intended for another gas.
- Open the valve slowly, and never force it with a tool if it will not open by hand.
- Close the valve and vent the regulator after every use.
- Never move a cylinder by rolling it or dragging it by the valve — use a proper trolley.
- Check for leaks with soapy water, never with a flame.
Cryogenic liquid
- Cryogenic liquid causes immediate cold burns on contact — wear insulated gloves, a face shield and full body cover.
- Never seal a vessel containing cryogenic liquid; expansion as it boils off builds dangerous pressure.
- Use only in a well-ventilated space — evaporating nitrogen or argon displaces oxygen from the air and causes asphyxiation with no warning.
- Never carry liquid vessels in an enclosed cabin with people.
- Use tools and metals rated for low temperature; ordinary metals turn brittle and crack.
Transport
- Carry cylinders upright and secured, in a ventilated vehicle.
- Never carry cylinders in the passenger cabin or a fully sealed compartment.
- Keep valve caps fitted throughout the journey.
- Make sure gas identification labels and hazard markings are on the load.
- Do not leave cylinders in a vehicle standing in direct sun for long periods.
This is general awareness guidance. It does not replace the safety data sheet for each gas, nor proper staff training. The safety data sheet is the authoritative reference.
Wherever you are
Our branches
Five branches across Homs, Damascus and Rural Damascus for delivery, filling and technical advice.
Head office
Homs — Hasya Industrial City
Hasya Industrial City, Chemical Industries Zone, Homs
Rural Damascus — Al-Nabk, Al-Sham Road
Al-Nabk, Al-Sham Road, Rural Damascus
Damascus — Al-Qaboun Industrial Zone
Al-Qaboun Industrial Zone, Damascus
Damascus — Al-Qadam, Daraa Highway
Al-Qadam, Daraa Highway, Damascus
Damascus — Adra Industrial City
Adra Industrial City, Rural Damascus
Our network
Our agents
Authorised agents across the governorates, for local delivery and fast service.
Our agent list is being updated. Contact us directly and we will point you to the nearest distribution point.
Become an agent
Interested in representing us in your governorate? Send us a message and we will get back to you.
Frequently asked
Common questions
Questions we are asked often. If what you need is not here, contact us directly.
Which gases do you produce?
Nabik Oxygen Factory produces three gases: Oxygen (99.6%), Nitrogen (99.999%), Argon (99.9995%). All three are available in both gaseous and liquid form.
How can the gas be supplied to me?
Three ways: compressed gas cylinders, dewars for cryogenic liquid, and bulk road tankers for oxygen and nitrogen. See the supply modes section to find the one that matches your consumption.
What is the filling pressure for each gas?
Oxygen (100–150 bar), Nitrogen (100–150 bar), Argon (200 bar)
What cylinder sizes are available?
Several sizes are available, varying by gas. Contact us for the sizes and quantities currently in stock.
Is the company certified?
Yes — ISO 9001:2015 for quality management, with the scope: Production and distribution of liquid and gas (nitrogen, oxygen and argon). The company also operates under Industrial Registry No. 1 and Ministry of Health Licence No. 1338.
Do you supply medical oxygen to hospitals?
Yes, under Ministry of Health Licence No. 1338. See the medical gases section for detail on supply to the health sector.
Which sectors do you serve?
Healthcare, Steel, Chemicals, Oil and gas, Food, Glass, Water treatment, Welding and fabrication, Leather, Lighting.
Do you supply gases you do not produce?
Yes, through our commercial division: Compressed air, Gas mixtures, Carbon dioxide (CO₂), Nitrous oxide, Acetylene, Helium, Neon. We also supply cylinders, regulators, gauges and operating accessories.
How do I order, and how does the gas reach me?
Order directly over WhatsApp or by phone. We have 5 branches, plus an agent network across the governorates — see the branches and agents sections for the nearest point to you.
At your service
Contact us
For orders, quotations and technical advice — choose whichever channel suits you best.
WhatsApp chat
Fastest response for orders
+963930901030For formal quotations and tenders
[email protected] Head office: Hasya Industrial City, Chemical Industries Zone, Homs